OBD2 to OBD1

[Santys EK]

i need some more info on this i have got great info from eric and markpa but what do i need for my car to make it obd1 and what can i take off my car???

i have a 97 ek hatch with a b16a2 in it

i know i need a:
p28 or p06
obd2 to obd1 pnp
and nick from teknotik to go nuts with it haha


all info is great

[conv2vtec]

u can run either or P28 or P06...so long as its chipped

and as for OBD2-OBD1...all u need is a harness to convert...Nick also sells those

run free little twin...lol

[Santys EK]

twin for life... well until i paint it

ya i think ill get a p28

[FlatBlack]

twin for life... well until i paint it

ya i think ill get a p28

If you cant find a P28, (Me, nick over at teknotik) can convert a non VTEC ecu to VTEC. Its sometimes easier and cheaper to get a non VTEC ecu and convert it, rather then get a P28. Or even if you find an Automatic ECU, i can convert it to 5spd for free when it gets chipped

[Santys EK]

what would that cost me to get a obd2 to obd1 pnp and a p06 chipped for vtec???

tell me in pm if u dont want anyone to know

[FlatBlack]

what would that cost me to get a obd2 to obd1 pnp and a p06 chipped for vtec???

tell me in pm if u dont want anyone to know

Its ok, its not a secret. We charge $150 for our brand new OBD2 to OBD1 hanresses. I know you can find some for cheaper but they use, used parts and can have problems.

For chipping and VTEC'ing. We charge $100 to chip a USDM ECU or $150 to chip a JDM ECU (cuz there harder and use different parts) and only $50 to add VTEC to an ECU that we are chipping at the same time.

[Santys EK]

okay sweet

is it better to chip a p28 or p06??

[Santys EK]

i have a p72 but isnt that obd1/???

could this lead to my really shitty gas milage

[Gunnis]

Goodluck and FYI...

There are OBD1 AND OBD2 P72 ECU's.

An OBD1 Harness will not plug into an OBD2 ECU and vice Versa.

[Santys EK]

i here u on the p72 and i know it i cant plug a obd2 in to a obd1

[baby boi gsr]

okay sweet

is it better to chip a p28 or p06??

it would be easier to chip a p28 but you will have a better luck finding a cheap p06

I saw some p06s on TCC for like $20 and p28s for $100+

[Markpa]

okay sweet

is it better to chip a p28 or p06??

it would be easier to chip a p28 but you will have a better luck finding a cheap p06

I saw some p06s on TCC for like $20 and p28s for $100+
yup...just get a p06

[Santys EK]

ya im going to i was talking to nick at the dyno day and he was telling me about it